↧
Freddie Frith, 1937
↧
Heavy Weight Webb Girder Forks - For sale
![]() |
Click this link for all photo's |
-SG- David Warren is now able to supply heavyweight Webbs as fitted to CS1, ES2 and Model 25s; please find David's word below. Click this link for a full set of photo's.
-David- H. C. Webb & Co Ltd produced Heavy Weight Girder Forks circa 1926 to 1932. In the 1930 advertising material the company stated “There are many spring Forks available, but the “Webb” Spring Fork is “Something Different” – “Something Superior.”"
Favoured by many motorcycle manufacturers the Webb Fork incorporated the Bentley and Draper Stabiliser as part of its construction, affording damper pressure in exact accordance with that applied to the adjusters, and these being independent of the “necessary sideways adjustment of the fork links.”
IMITATED BY ALL.
EQUALLED BY NONE.
The project to reproduce authentic replica Heavy Weight Webb Forks started in 2014. Three factors gave rise to the impetus to recreate Webb Forks:
- The observation that there were many vintage motorcycle restoration projects that had stalled for the lack of the HW Webb Forks, or that had to use incorrect forks
- Seeing the difficulty many restorers had in bring back to safe operation badly damaged forks
- The engineering challenge…
Research and development of the necessary tooling, jigs, and castings followed extensive analysis of numerous sets of Webb forks. The result is authentic Heavy Weight Webb Forks that match or exceed the original manufacturer’s specifications. Click this link for the photo's.
Each set of Forks comprises some 11 castings, 58 individual parts, and requires over 200 fabrication operations. Of note are the correctly rotary swaged fork tubes. These are made from 1” OD, 1/16” wall tube. Two dies-sets taper the tubes from 1” in the centre to 5/8” at either end. The rotary swaging results in a doubling of the tube wall thickness at both ends of the tubes.
All castings are bright annealed and inspected for any foundry flaws. Following machining the castings are assembled with the fork tubes in a rigid welding jig, and brazed using high silver content filler rods. Sample inspection of the completed joints shows complete wetting of the sockets and tubes, confirming the correct welding temperature and excellent capillary flow of the filler material.
Norton CS1, ES2, and Model 25 forks were supplied as standard with a Webb central steering column damper, where the adjustment of the friction pressure was made by way of a knurled Bakelite knob on top of the column. The replica forks are supplied with the Webb damper.
Period racing photos of the CS1 mostly show an Andre steering damper. If an Andre was fitted it says so in the records and usually indicates it was non-standard. The forks can be supplied ready for fitting an Andre damper if required.
For further information and pricing contact:
David Warren Motorcycle Engineering,
Warkworth, New Zealand
nzsurfer@gmail.com
+64 21 654 322
↧
↧
The 1924 Norton brochure
-SG- Herewith a copy of the 1924 Norton brochure, provided by Ian. Follow this link for the complete booklet
↧
The 1922 Norton brochure
↧
George's notes on the assembly of Cammy engines
![]() |
Click this link for a manual on how to rebuild this engine |
-JdK- This text was sent to me by George Cohen in 2011, when discussing the reassembly of my 1931 CS1 engine. George asked me not to share these words as they would one day be part of a manual. Alas, George died in 2016 and – as far as I know – never completed the manual. I found these notes very useful and decided to clean up the text and share it after all, assuming George would not have minded given the circumstances. Be aware this manual is far from complete and missing text is indicated by (…).
↧
↧
Maudes Trophy
-SG- In September we had a posting about Norton's mid-twenties successes in the Maudes Trophy. Ian has kindly loaned a photo of the outfit used in their 1924 attempt, showing Phil Pike on the bike (a Big Four), and Arthur Bourne in the chair as the official ACU Observer. Like a lot of Norton's own publicity photos, this one was taken by Birmingham photographer F R Logan. Wonder if his negatives have survived ... Arthur Bourne went on to become Editor of Motor Cycle and his memoirs should have been published earlier this month. West Country dealer Phil Pike sadly died as a result of an air raid during WW2.
↧
Those 8" front brakes
-SG- It is generally thought that works Nortons started using the 8" Enfield front brake with the machines used for the 1926 season. However, it seems, from a recent 1925 Ulster photo appearing in Classic Motorcycle (inconveniently spread over two pages - how annoying I find that and so easily remedied!) - that the late '25 Works bikes were also fitted with this brake. That it is not perhaps the best brake of its time is open to discussion but I guess it was a good deal better than the puny 6" affair used on the works bikes earlier in the '25 season.
By chance I was sent a photo (above) a few years back showing a pair of 1925 works bikes, with Bennett and Craig aboard. It was perhaps at an event in France although Bennett's bike has no registration number plate on it and I am told this was compulsory for road racing events in France held on public roads. Be that as it may, it shows very clearly that Craig's bike has the 8 inch brake while Bennett's has the special 6 inch version, with leading brake arm, not seen on production Nortons of the period.
↧
1926-1933 Norton exhaust nuts - For sale
David in New Zealand has reproduced exhaust nuts for 1926 to 1933 Norton OHV and OHC engines. The parts books refer to these as "Exhaust Pipe Flange Locking Nuts". There are two sizes, both 14 threads per inch:
Large:
Exhaust Pipe 1 7/8"
Nominal Thread 2 5/32"
Small:
Exhaust Pipe 1 3/4"
Nominal Thread 2 1/16"
The exhaust nuts are fabricated to the original specification and are finished with black etch primer. The cost per nut is NZ $125, plus postage. Contact David Warren nzsurfer@gmail.com
↧
New Models for 1928
-SG- Thanks again to Ian for the loan of this fold-out leaflet covering the introduction of the CS1 and ES2 models. The illustration of the latter (above) shows it with the wrong Best and Lloyd oil pump fitted - obviously a matter of little concern to the publicity chaps at Norton's as they went on using the same retouched photo for quite a while! Worth noting too that the rear brake anchor set-up differs somewhat on production models to that is shown in this leaflet.
↧
↧
1933 Model 50 Norton
-JdK- Bas in the Netherlands just got this 1933 Model 50 Norton and Simon looked up the numbers:
"Pleased to say engine and frame match! It is listed as a 1933 Model shipped October 1932 to Petersens Denmark. Originally had a specially tuned engine, dynamo, gate change on tank, speedo and control panel. Gearbox was 6761 and forks 6942."
The first issue to fix is the broken framelug for gearbox attachment/primary chain adjustment. If anyone has a scrap frame with an intact lug (or another solution), please contact us.
↧
The 1923 Norton brochure
-SG- We recently posted the 1924 booklet and here's another similar one, in the introduction described as 'abridged.' It seems virtually the same as regards content but I suspect it actually dates from 1923 rather than 1924, due to the text references to 1922 events and the fact that it still has an illustration of the Model 9 Single Speed belt driven machine. Thanks for the loan, Ian! (Click this link for the PDF).
↧
Charlie's bikes
-JdK- Steve sent these pics of Charlie Cockcroft, his father-in-law, on his bikes. The Norton (XG4849) is a c1936 Model ES2 Norton and it looks quite new. XG3961 is a Triumph and Hans, who has a similar machine, wrote the words below:
"XG3961 is a 1935/36 Triumph Model 3/5 (350 c.c.) or 5/5 (500 c.c.). The /5 models were the specials in the OHV range with higher cams and a high compression piston. The petrol tank for these models were finished in chrome and plum, very attractive. All models in this range were designed by Val Page. What is interesting is that this machine seems to have only one exhaust pipe on the right hand side while the /5 models always had, to my best knowledge, two-port cylinder heads."
↧
The 1926 Norton brochure
-SG- More from Ian ... this time, the 1926 catalogue - significant in that it lists the four speed models for the first time.
↧
↧
McCrae and Pascoe - Norton agents in Melbourne
![]() |
Click this link for the PDF |
-SG- Another of Ian's early twenties leaflets was issued by McCrae and Pascoe in Melbourne. This seems to date from about 1923 as it shows the first of the OHV machines although the printing blocks used for the side-valve bikes show the earlier versions with cycle type front brakes. Ian advises:
'In the October 14th 1922 issue of the 'Argus' newspaper, McRae and Pascoe announced that the first shipments of Nortons had arrived for sale. The models only being 2.5h.p. at Australian pounds 127/10/- and Big 4 at 162 pounds. 10,000 miles per tyres, 2 - 80 mph in top gear. "The unapproachable Norton motorcycle is undoubtably the last word in motorcycling efficiency" according to the advertisement. The 4th of April 1925 edition lists them as the sole agent for Nortons and Bonniksen speedos. "Now selling second hand Nortons as well from £57/10/-." At some later stage, the local Norton agency went from this company to an outfit called Disneys, but not sure when.'.
↧
Steve Lancefield's bike!
![]() |
Steve's 1927 Model 25 Norton |
![]() |
Steve in later days |
-SG- Steve Lancefield (S S Lancefield ) needs no introduction to those with an interest in racing Nortons - but he is well known primarily as an expert in engine preparation and for his association with Harold Daniell. However, thanks to Roger's investigations, it appears he also competed actively at Brooklands from 1929 to 1934, mounted on a 490cc Norton (no surprise there!).
None the less, prior to his appearances at the track, he rode on the road and it has now come to light, from a careful study of the despatch books by the present owner, that he took delivery of a Model 25 in 1927. This machine has appeared on the site before and is still used regularly. John, its owner, tells me it has extremely highly polished flywheels in it. It also has a Moore type CS1 piston and and at one stage, had a fairly ferocious exhaust cam, the like of which he has never seen before. This has had to be replaced due to shaft breakage but I am hoping for a photo of it in due course.
↧
Model CS1 (Moore) Norton
↧
Arthur Bourne aka 'Torrens.'
-SG- In a recent posting I mentioned Arthur Bourne's recently published memoirs. I have recently been given a copy and am pleased to see the cover shows him in 1929 - not long after he became editor of The Motor Cycle - mounted on a CS1 in the Land's End to John O'Groats Reliability Trial. The machine was, I guess, on loan from the works as it has a Birmingham registration number. This is a very interesting book and though not that cheap at £25, well worth it! Publishers are Matador Books.
↧
↧
Sidecar racing in The Thirties ...
-SG- ... is a subject about which I have only superficial knowledge and the recent article by Bob Zwarts which appeared the Vintage Motor Cycle Club magazine, entitled 'Push-rod Performance -1930's Style' is well worth a read. This covers the racing activities of Walter Bibby at Donington - starting with a home-brewed 588cc Model 19 outfit. Bob has given us permission to use his copyright text (many thanks!) on the site (below) while the accompanying photos are also acknowledged to various sources. The Donington photos are on Flickr (click this link) and show period shots of the leading Norton outfits - and their opposition - at this point in racing history.
-by Bob Zwart-
Background - In 2013 I became involved in identifying a historically important collection of very high quality photos from the 1930’s. These photos were rescued, by Richard Jones, from being individually sold and the collection dispersed. They featured sidecar/three wheeler races at Donington Park circa 1934 - 1939. The full collection, which led to Richard and myself writing a book about the racing at Donington in this period, can still be viewed on the web via this link.
On first seeing the photos, one outfit in particular stood out as being of special technical interest.
This we subsequently identified as the Norton sidecar outfit of W. Bibby from Wallasey, at the May 1937 event, probably taken at the Donington ‘Hairpin’, now known as ‘The Old Hairpin‘. Now if you look carefully you will see that the engine is not, as you would have expected, an OHC Norton, but a humble pushrod engine. At this point, you may be forgiven for thinking that Mr. Bibby is enjoying a ride out with the ‘stars‘, on their genuine racing Norton outfits, with little hope of success. Not so. Look again. This is obviously no ordinary Norton pushrod engine. A press report from 1937 described the Norton as ‘home tuned, having an extra large aluminium barrel and a bronze alloy head’. The appearance of the front brake suggests it has also received some serious attention and is not quite as it left Bracebridge Street. My initial conclusion - Walter was probably a man of considerable engineering skill and ability. Subsequent discoveries proved this to be correct.
Further research produced such a fascinating wealth of detail that we would like to share it more fully than was possible in our book. Much of this information came from Walter Bibby’s nephew, Roy Hoiles. Roy is the M.D. of Bibby Precision Engineering. This is the firm founded by Walter Bibby in the 1930’s and now based at Bromborough on the Wirral. Roy, who was trained in precision engineering by his uncle, is rightly proud of Walter’s achievements. Fortunately for those of us with an interest in racing history, Roy has carefully preserved many documents, photos, trophies and other items relating to Walter’s racing career. This material gives a unique glimpse into the early days of sidecar racing here in the U.K.
Walter Bibby was born in Wallasey in 1910. From the photos and newspaper cuttings we believe that he started racing in 1935, possibly earlier, at Park Hall, Shropshire. Walter quickly became skilled in a very special minority interest, he raced a sidecar outfit. This was at a period when track racing in England was enjoying something of a surge in interest. Due to our restrictive laws regarding road closure we have no tradition of true road racing on the British mainland but at this time grass-track racing was very popular.
At this point I must digress slightly to put the story into wider context. In the more enlightened parts of Europe, public roads could be, and were, closed for racing. This resulted in a series of Motorcycle ‘Grand Prix’ events becoming established, including classes for sidecars. Records show that this was the case in the 1922 Swiss, 1926 Swedish and 1929 Spanish Grand Prix events. Possibly even more surprising is that these G.P.’s often had individual classes for 350cc, 500cc and 1000cc sidecars. Some familiar names, Syd Crabtree (Excelsior), Freddie Hicks (Velocette) and Dennis Mansell (Norton) are listed among the winners. Here in the U.K. we had the Isle of Man TT races and similar events in Ireland but nothing comparable on the British mainland. Brooklands was something of a special case. Being banked, the outer circuit neither required nor encouraged the active participation of a sidecar passenger. So, despite sidecar races in the IOM TT in 1923/24/25 this left us trailing developments elsewhere in Europe and explains why our 1930’s racing outfits were based on grass-track experience rather than being purpose built for road/track racing. To illustrate this, I can do no better than to quote from a contemporary account of the Good Friday 1934 sidecar race at Park Hall -
“Sidecars came next - that is to say, motorcycles equipped with outrigger wheels, a platform and as many grab handles as might be found on a double decker bus going about its normal business. E.R.Evans (499cc Rudge) had a hectic trip, but his front wheel was often enough on the ground to maintain or change direction as required. The passenger of F.Eastwick’s O.E.C. - JAP outfit was thrown off his little platform but caught a grab handle and held on. For yards he was trailed like a comet - presenting his reverse and obverse contours to the road surface. Then he did some “giant strides” at about 40 m.p.h. and was finally bounced back on board - not normally seated! Only later did the driver learn that the applause was not for his skilful handling round the S bend”.
We can only hope that the poor passenger’s ‘contours’ did not suffer permanent modification from this diversion.
It was in this prevailing milieu that Walter Bibby made his first steps into a successful racing career on three wheels. Syston Park , Lincolnshire, was first used as a road race circuit in 1926 and Park Hall similarly but then came the 1930’s and Fred Craner. This remarkable man was the driving force behind the rapid rise to pre-eminence of the Donington Park circuit. That’s a separate story in itself, so now I will return to Walter Bibby and his pushrod Norton outfit.
It appears, from the stated capacity, to have been based on a 588cc (79mm X 120mm) Model 19 Norton and therefore of pre-1933 vintage. The earliest photo we have of the outfit in this initial form is from Park Hall 1935. His first appearance at Donington was on Easter Monday 1936. He entered two races, the 10 lap handicap race for 350cc - 600cc sidecar outfits and the 10 lap handicap race for 350cc - 1100cc ‘passenger machines’ i.e. sidecars and three-wheelers. The formidable opposition on the day included established ‘regulars’ - Harold Tozer (596cc Norton), Bill Rose (596cc Norton), Len Taylor (490cc Norton), Henry Laird (‘Red’ - supercharged 1084cc JTOR JAP - Morgan) and Cyril (Charlie) Hale (Morgan -MX4). In the first race, Walter finished in fourth place, almost 2 ½ mins. behind the winner, Bill Rose. In the second race he improved on this with faster lap times, we have copies of the original lap time sheets, to finish third behind Bill Rose and Len Taylor. In fairness to the opposition it must be mentioned that Laird went out on lap 5 with an oil pump failure whilst Hale retired on lap 4.
For reasons unknown and despite his initial success, Walter did not appear at Donington Park again during 1936. We do know that he raced at Park Hall, in the August Bank Holiday Monday event, winning both sidecar races outright. We can also speculate that having the experience of racing against the top British sidecar teams of the time, he simply went away and took ‘time-out’ to develop his Norton outfit and make it more competitive. Our first photos and descriptions of the resulting ‘special’ outfit date from its appearance at the Derby and District motor Club’s Donington event, Easter Monday 1937. Walter, entered as no.130, was riding in the 350cc - 1100cc sidecar & three-wheeler handicap race.
The start of this race was postponed to allow Henry Laird to make urgent repairs to the Zoller supercharger fitted to his 1084cc Morgan “Red”. The blower blades had ‘picked up’ during practice and required some extra clearance. There were only four entries for the class, the others being Walter Bibby 588cc Norton, R.Evans 595cc Grindlay-Peerless JAP, and Len Taylor who now had a 596cc Model 30 Norton. The sidecars had a 40 sec. start over the Morgan with Taylor taking the lead which he held to the end of the 10 lap race. Laird, with co-pilot and brother in law, Michael Faraday, was going very well and passed Evans and Bibby. He may well have passed Taylor, given another lap or two. So, on his first appearance with the heavily modified 588cc Model 19 Norton special, Walter achieved a creditable third place behind the 596cc Model 30 Norton of the very experienced Len Taylor and the blown Morgan of Henry Laird. It is worth noting that this result netted a prize of £10 for Taylor and £4 for Bibby, with £1 and a half pint tankard for Taylor’s passenger, Stan Nicholls. Whilst this might not seem very much reward, comparison using an inflation calculator shows these payments equivalent in today’s value as £600, £245 and £61 respectively and also gives an indication as to the healthy financial status of the Derby and District Motor Club at the time.
Walter’s next appearance at Donington was a few weeks later, at the 1937 Whit. Monday event where he rode as no. 154 in the 10 lap sidecar and three-wheeler handicap race, as shown in photo no.1. We also have the lap time sheet for this event and for the first eight laps, the Bibby Norton was consistently achieving an average lap speed around 55mph. This comfortably exceeded the race average of the winner V.S.Graham (595cc Grindley JAP) at 53mph and Cyril Hale’s Morgan at 51 mph. Following the retirement of Len Taylor’s Norton with plug trouble and Henry Laird’s Morgan with the magneto coming loose on its mountings, Walter’s Norton led the race until forced to slow down in the final two laps due to fuel starvation, finally running out of fuel completely at Starkey’s corner, just within pushing distance of the finish line to secure second place. The race was won by Versey Graham, Versey being the elder brother of Les Graham, yes THE Les Graham, winner of the inaugural 500cc World Championship in 1949 riding the AJS Porcupine. Les rode as passenger for Versey on occasion.
This was to be the swan-song for the Bibby pushrod engined special, at least as far as Donington is concerned. At the August Donington event, Walter was riding an OHC Norton 596cc Model 30, but I will come to that later.
Now is a good time to examine the details of the 588cc Norton and try to follow Walter’s thinking on what was required to build a machine which would stand the considerable rigours and stresses of racing on three wheels. For these details, I am again indebted to Roy Hoiles in allowing me to view and copy the original photos and to Archie Beggs for a first hand description of some features which he remembers from later appearances of the 588cc outfit in events at Oulton Park and Rhydymywn during the 1950’s.
As previously mentioned, the cylinder barrel is a light alloy casting encasing a cast iron liner, with a large area of cooling fins from the level of the crankcase to the base of the cylinder head and partly encircling the pushrods. Particularly important with this engine as we think that it was fuelled by petrol, not cool running dope (methanol). The cylinder head was a one-off item, cast in Aluminium-Bronze. This material, having greater thermal conductivity than cast iron, permits a higher compression ratio to be used, giving a significant power increase. Archie Beggs suggested that the head would have been cast locally at the Manganese Bronze foundry to patterns made by Walter, or at least to his design. Roy Hoiles confirmed this possibility as he remembers Walter turning bronze ‘test pieces’ for the Manganese Bronze foundry. Here we find a connection with another of the principal players in this story - Henry Laird was a grandson of the founder of Cammell - Laird, the shipbuilders. Based at Birkenhead, their ship propellers were cast at Manganese Bronze, probably alongside Walter’s unique cylinder head. There’s yet another link, Manganese Bronze eventually became the owners of the Norton name. Moving down the engine, the drive side crankcase has a large, webbed, circular plate extending from the main bearing housing to the circumference of the crankcase. Clearly visible in Photo 2, this is another bronze casting, the benefits of which would be threefold. It would give extra support to the drive-side crank which, at this time, only had a single drive side main bearing. The 588cc Model 19 has an ‘open’ frame i.e. the crankcase forms part of the lower frame and the lower front sidecar attachment is mounted here, so the additional strength deriving from the bronze plate would distribute the stresses induced by spirited cornering and acceleration. Lastly, it would help to prevent the drive side crankcase wall from breaking away. This is a known failure, apparently peculiar to sidecar racing. Gyroscopic forces generated by the flywheel/crank assembly resist lateral changes of direction during fast cornering. The reaction force, being provided by the drive side crankcase, places considerable stress on this component. Pre-unit Triumph twin engines are noted for this failure, as anyone who frequents the paddock of VMCC racing events will know. Moving on to the cycle parts, the front brake drum and brake plate appear to be made in light alloy, the drum being ribbed and of significantly larger diameter than the original and presumably constructed as a shrunk on ‘jacket’ around an iron liner. The sidecar wheel is also braked, operated via a cross shaft carried in bearings mounted on the chassis and linked by rod to the brake cam arm. The sidecar body is a very neat design, devoid of the more usual nest of tubes and grab handles and carries a road tax disc. In other photos the outfit bears the reg. no. HF4080. Walter probably enjoyed a bit of unofficial practice, as we all do. The sidecar wheel spindle is extended outboard to a small platform for the passenger to stand on when ‘hanging out’ for a left hander. All in all, the outfit shows some very clever thought and logical design, executed to a high standard.
Now we come to what might be called the second phase of Walter’s racing career. Between Whit. Monday and August 2nd 1937 he had acquired a Norton M30 596cc outfit. I believe that this was in fact the outfit raced very successfully by Bill Rose between 1932 and 1936. We have photos of Bill Rose at the Aug.1936 Donington meeting (his last recorded appearance at Donington) and Walter’s first appearance with the 596cc M30 Norton in Aug 1937. In both cases, the sidecar body has the same distinctive features and the two outfits are identical in visual appearance, with one minor difference, Walter has added his road tax disc holder.
All speculation aside, Walter’s first race with the ‘new’ outfit was not without incident. In what is considered to be one of the finest events ever held at Donington up to this date, 152 entries had been accepted, including nearly all the top U.K. riders of the time. Six sidecar outfits and 3 Morgans lined up for the start of the 5 lap 1100cc passenger class:-
Taylor took the lead in the second lap while Laird had trouble getting off the line due to a misfire but soon got into his stride. Graham and Bibby were engaged in a fierce battle for second place whilst Taylor increased his lead, but Laird was coming up through the field and driving magnificently in an effort to make up for his poor start. On the last lap Laird passed Bibby on the fast downhill approach to Starkey’s, the final corner before the chequered flag. Trying to regain his second place, Bibby cut inside the Morgan as he rounded Starkey’s, clipping the Morgan, over-turning and somersaulting off the track at an estimated 40mph, luckily without serious injury to either the outfit or the crew. Laird handled the situation well, claiming second place to Taylor who had built up an unassailable lead. They were followed home by Bury, Hale and Graham. The location of the ‘Timing Box’ gave the timekeepers a good view of Starkey’s, so they would have seen Walter’s excursion and we have a copy of his timesheet for this race. In place of a time for lap 5, the timekeepers wrote the comment “see footnote” which reads : “Scale of charges - 1 gill of Bitter beer per 10 laps, or part thereof, per race, plus ... in this instance of 1 large Brandy each for shock and extra nourishment.”
Later, following a break for lunch and the 250cc and 500cc solo races, the 10 lap ‘Passenger Grand Prix’ produced another win for Taylor who was unbeatable on the day. Laird led by the end of the first lap despite his handicap start but was destined not to finish this, his last ever, race at Donington. The Morgan’s engine began to seize due to a fractured oil pipe and he was forced to retire. Ted Bury finished in second place with Horton third. Further back, Evans and Graham did not complete the distance, nor did Bibby who was said to have ‘ridden a good race, as long as it lasted‘. Walter was probably still suffering the effects of his earlier incident. His first event on the ‘new’ machine could be described as somewhat traumatic but riding an unfamiliar machine to the limits of what is possible is, by definition, a learning process and 1938 was to prove that he had absorbed the lessons well.
Now we come to Walter’s last season of racing at Donington. By 1938 he could be considered a seasoned campaigner, able to ‘mix it’ with the best, and on an equal footing now that he was equipped with the 596 M30 Norton outfit. Over the winter, the sidecar had undergone a radical transformation. It is very possible that the original body work was too badly damaged in the Aug.’37 incident, or he decided that he wanted something lighter and minimal. There was now no bodywork beyond a simple nose-cone and mudguard over the sidecar wheel.
Easter Monday, 18th April 1938, dawned cold but bright. A large crowd was expected as this was to be the first time motorcycle races were held on the fully extended circuit incorporating a longer straight which by-passed Starkey‘s and continued down to the new ‘Melbourne’ corner. The sidecar/three-wheeler entries included -
Jackie Beeton had a 20s. start from Len Taylor, but was soon caught and passed by Taylor. Beeton held on to second place until the sixth lap when he was passed first by Bibby, then Tinsley and this was the finishing order.
The second sidecar/three-wheeler race was more exciting as it featured three separate battles. As before, Beeton took an early lead but the fight for first place quickly developed into a contest between Taylor and Arthur Horton. Horton’s outfit appeared to have the edge on speed down the straights, possibly due to carrying more corner speed as it was now set up to use the ‘front exit’ passenger technique on left hand corners. Horton finished not only in first place but also broke the sidecar lap record at 61.34 mph. The second duel, between Beeton and Bibby for third place went to Bibby, with Beeton finishing fourth. Meanwhile, George Buck was successfully challenging Graham for fifth place. Taylor and Beeton both broke the 60mph barrier and must have finished very closely, but third place man Bibby was only 30s. behind the winner with an average speed of 58.87mph.
The next Donington event was on Whit. Mon. 6th June 1938. The day began with a thin drizzle and high winds, not ideal racing conditions, but still attracted a good sized crowd and produced a new sidecar lap record. The first of the two sidecar / three-wheeler races featured seven outfits and three Morgans. Len Taylor took an early lead and was only challenged, unsuccessfully, by Horton who in turn was challenged strongly by Bibby, until a sidecar wheel puncture put Bibby out of contention on the sixth lap. This was disappointing as Walter’s battle with Horton had reduced his lap times to within 4s. of the lap record, set by Horton at the previous event. The race was won by Len Taylor at race record speed with Horton in second place. Phil Heath (Morgan - Blackburne) held on to a lucky third place, his top gear drive chain breaking as he crossed the finish line with Graham in fourth position. In the second race, Taylor again stormed off into a decisive lead with Horton in hot pursuit and that’s how the race finished, with Bibby in third place and F.E.G. Radcliffe (490cc Norton M30) in fourth place. Taylor again broke the sidecar race and lap records at 61.67mph. By contrast, in this race, the Morgan men were struggling. Hale came off the circuit at Redgate corner ( a left hander in this era) regained control but then retired with a seized engine and Phil Heath retired with mechanical problems in the second lap. Len Taylor and passenger Stan Nicholls must have been very satisfied with their performance and with their 596cc Norton, on that day they were seemingly unbeatable.
Now we come to Walter Bibby’s finest performance at Donington. The August Bank Holiday event was held on 1st Aug. 1938 and was split into two distinct sessions. In the morning, all classes, including the sidecars and three-wheelers were to race over the relatively short distance of four laps, approx 12 ½ miles. Then after a break for lunch, the “Grand Prix” races would be contested over 16 laps (50 miles) for the solo classes and 8 laps for the sidecar/three-wheeler class.
The first sidecar race seems to have been relatively uneventful. J.Varlow, riding Ratcliffe’s 490cc Norton outfit, was given a 40s. start, ahead of the 596cc Nortons and the sole Morgan entry, Charlie Hale. The 4 laps proved insufficient for Taylor and Hale to catch Varlow despite trying all they knew. Horton’s challenge was defeated by an oiled plug on the first lap and Hale, whose engine was by then firing on only one cylinder, had to give way to Evans (490cc Rudge) on the last lap. In the attempt to catch Varlow and stay with Taylor, Hale had raised the lap record for the class to 62.09mph. Walter Bibby is not mentioned in the results for this race.
After lunch, the 8 lap sidecar and three-wheeler Grand Prix race began to shape up well with a major battle for supremacy between Bibby and Taylor, with neither prepared to give any ground. The outcome was an uncharacteristic loss of control by Taylor who left the circuit at Redgate, losing his passenger and eventually coming to rest “very shaken” and out of the race. Meanwhile, Bibby was now engaged in battle with Horton but Horton also left the race, albeit less dramatically. His carburettor float chamber had succumbed to the vibration and fractured, putting him out of the race and giving Bibby first place which he held the end. He was followed home 53s. later by Varlow and then E.R.Evans (499cc Rudge) in third place. It could be argued that Walter Bibby and passenger won this race by default, however there is an undeniable fact to refute this. In the course of the race they had raised both the race and lap records. This made them the fastest men on three wheels around Donington at the time and must have given Walter and his unnamed passenger, about whom we know absolutely nothing, tremendous satisfaction. They had come a long way in the sport, in a relatively short time.
That would normally be the end of the season for motorcycle racing at Donington but 1938 marked the 50th Anniversary of the invention of the pneumatic tyre by John Boyd Dunlop. On 11th. August, ‘The Motorcycle’ was reporting a large entry for the Dunlop Jubilee event to be held at Donington on 27th Aug. On the day, a crowd of 20,000 spectators was recorded. The LMS Railway Co. was running a special train, leaving London Paddington station at 0825 and arriving at Derby at 1125. This allowed for travel by bus to the circuit in time for the racing which was due to commence at 1415. An illustration of just how important Donington Park had become under the management of Fred Craner and the Derby and District Motor Club.
The 5 lap sidecar and three-wheeler race was programmed to start at 1530hrs. Alfred Kirsch (100cc Universal -JAP) set off very quickly, demonstrating why he was the 1936 Swiss National sidecar champion (1000cc class). Kirsch was closely followed by Bibby and Horton, Horton having recently won the sidecar race at the 1938 Swiss Grand Prix. Behind these three contenders, Hale was driving his 8/80 JAP -Morgan with considerable élan but Taylor was, unusually, suffering from engine trouble and not showing his usual form. Horton managed to pass Bibby and set off after Kirsch, catching him on the fourth lap when the Universal-JAP retired with engine problems. ‘The Motorcycle’ reported that the action was heart stopping with front forks whipping about as though they were made of elastic and Charlie Hale coming round a right hand bend, in the middle of the sidecar pack, in a spectacular fashion. This superb race ended in a win for Arthur Horton, with Bibby only 5s behind followed by Hale. Horton’s outfit was by this stage, technically years ahead of the opposition here in the U.K.
It featured suspension on all three wheels, a padded platform and passenger front exit provision, along with much cleaner aerodynamics provided by the alloy sidecar wheel cover and nose cone. So advanced that it did not look out of place in the early 1950’s when sidecar racing took its next steps forward following the establishment of the World Championships in 1949. It is worth noting that the benefits of these advances were still the subject of debate into the 1950’s by leading exponents such as Eric Oliver, Cyril Smith, Pip Harris and Ted Davies.
The racing career of Walter Bibby, at least so far as Donington Park is concerned, came to a close with that late August 1938 event. We have been unable to find mention of him in any of the 1939 programmes or reports.
So what became of the unique 588cc Norton M19 special? Archie Beggs recalls seeing it in competition throughout the 1950’s and into the early 1960’s, suggesting that it did not leave the Merseyside area. Sadly, he also remembers that it was finally scrapped. The early ’60’s was a time when interest in preserving our racing heritage was at a particularly low point. If only someone had the foresight to rescue and preserve this machine, what a wonderful sight and sound it would have made in Vintage Racing today.
As for Walter, his nephew Roy tells me that apart from his engineering business, he had two big interests in life - Motorcycles and fishing. Paddock photos suggest that he greatly enjoyed his racing and the results show that he was competitive at the top level of the sport. Personally I like to think of him as a pioneer, pushing the limits of his riding skill and his machines in a relatively new, exciting and rapidly developing branch of motorcycle sport. With the 588cc Special he had so much in common with those who were to follow much later, in Vintage racing, seeking to develop apparently unlikely machines into race-worthy devices - but not always with Walter Bibby’s degree of success.
The photo acknowledgements are as follows - Photo 1 and 6: Bob Light and Mike Lawrence. All others Roy Hoiles.
-by Bob Zwart-
Background - In 2013 I became involved in identifying a historically important collection of very high quality photos from the 1930’s. These photos were rescued, by Richard Jones, from being individually sold and the collection dispersed. They featured sidecar/three wheeler races at Donington Park circa 1934 - 1939. The full collection, which led to Richard and myself writing a book about the racing at Donington in this period, can still be viewed on the web via this link.
On first seeing the photos, one outfit in particular stood out as being of special technical interest.
This we subsequently identified as the Norton sidecar outfit of W. Bibby from Wallasey, at the May 1937 event, probably taken at the Donington ‘Hairpin’, now known as ‘The Old Hairpin‘. Now if you look carefully you will see that the engine is not, as you would have expected, an OHC Norton, but a humble pushrod engine. At this point, you may be forgiven for thinking that Mr. Bibby is enjoying a ride out with the ‘stars‘, on their genuine racing Norton outfits, with little hope of success. Not so. Look again. This is obviously no ordinary Norton pushrod engine. A press report from 1937 described the Norton as ‘home tuned, having an extra large aluminium barrel and a bronze alloy head’. The appearance of the front brake suggests it has also received some serious attention and is not quite as it left Bracebridge Street. My initial conclusion - Walter was probably a man of considerable engineering skill and ability. Subsequent discoveries proved this to be correct.
Further research produced such a fascinating wealth of detail that we would like to share it more fully than was possible in our book. Much of this information came from Walter Bibby’s nephew, Roy Hoiles. Roy is the M.D. of Bibby Precision Engineering. This is the firm founded by Walter Bibby in the 1930’s and now based at Bromborough on the Wirral. Roy, who was trained in precision engineering by his uncle, is rightly proud of Walter’s achievements. Fortunately for those of us with an interest in racing history, Roy has carefully preserved many documents, photos, trophies and other items relating to Walter’s racing career. This material gives a unique glimpse into the early days of sidecar racing here in the U.K.
Walter Bibby was born in Wallasey in 1910. From the photos and newspaper cuttings we believe that he started racing in 1935, possibly earlier, at Park Hall, Shropshire. Walter quickly became skilled in a very special minority interest, he raced a sidecar outfit. This was at a period when track racing in England was enjoying something of a surge in interest. Due to our restrictive laws regarding road closure we have no tradition of true road racing on the British mainland but at this time grass-track racing was very popular.
At this point I must digress slightly to put the story into wider context. In the more enlightened parts of Europe, public roads could be, and were, closed for racing. This resulted in a series of Motorcycle ‘Grand Prix’ events becoming established, including classes for sidecars. Records show that this was the case in the 1922 Swiss, 1926 Swedish and 1929 Spanish Grand Prix events. Possibly even more surprising is that these G.P.’s often had individual classes for 350cc, 500cc and 1000cc sidecars. Some familiar names, Syd Crabtree (Excelsior), Freddie Hicks (Velocette) and Dennis Mansell (Norton) are listed among the winners. Here in the U.K. we had the Isle of Man TT races and similar events in Ireland but nothing comparable on the British mainland. Brooklands was something of a special case. Being banked, the outer circuit neither required nor encouraged the active participation of a sidecar passenger. So, despite sidecar races in the IOM TT in 1923/24/25 this left us trailing developments elsewhere in Europe and explains why our 1930’s racing outfits were based on grass-track experience rather than being purpose built for road/track racing. To illustrate this, I can do no better than to quote from a contemporary account of the Good Friday 1934 sidecar race at Park Hall -
“Sidecars came next - that is to say, motorcycles equipped with outrigger wheels, a platform and as many grab handles as might be found on a double decker bus going about its normal business. E.R.Evans (499cc Rudge) had a hectic trip, but his front wheel was often enough on the ground to maintain or change direction as required. The passenger of F.Eastwick’s O.E.C. - JAP outfit was thrown off his little platform but caught a grab handle and held on. For yards he was trailed like a comet - presenting his reverse and obverse contours to the road surface. Then he did some “giant strides” at about 40 m.p.h. and was finally bounced back on board - not normally seated! Only later did the driver learn that the applause was not for his skilful handling round the S bend”.
We can only hope that the poor passenger’s ‘contours’ did not suffer permanent modification from this diversion.
It was in this prevailing milieu that Walter Bibby made his first steps into a successful racing career on three wheels. Syston Park , Lincolnshire, was first used as a road race circuit in 1926 and Park Hall similarly but then came the 1930’s and Fred Craner. This remarkable man was the driving force behind the rapid rise to pre-eminence of the Donington Park circuit. That’s a separate story in itself, so now I will return to Walter Bibby and his pushrod Norton outfit.
It appears, from the stated capacity, to have been based on a 588cc (79mm X 120mm) Model 19 Norton and therefore of pre-1933 vintage. The earliest photo we have of the outfit in this initial form is from Park Hall 1935. His first appearance at Donington was on Easter Monday 1936. He entered two races, the 10 lap handicap race for 350cc - 600cc sidecar outfits and the 10 lap handicap race for 350cc - 1100cc ‘passenger machines’ i.e. sidecars and three-wheelers. The formidable opposition on the day included established ‘regulars’ - Harold Tozer (596cc Norton), Bill Rose (596cc Norton), Len Taylor (490cc Norton), Henry Laird (‘Red’ - supercharged 1084cc JTOR JAP - Morgan) and Cyril (Charlie) Hale (Morgan -MX4). In the first race, Walter finished in fourth place, almost 2 ½ mins. behind the winner, Bill Rose. In the second race he improved on this with faster lap times, we have copies of the original lap time sheets, to finish third behind Bill Rose and Len Taylor. In fairness to the opposition it must be mentioned that Laird went out on lap 5 with an oil pump failure whilst Hale retired on lap 4.
For reasons unknown and despite his initial success, Walter did not appear at Donington Park again during 1936. We do know that he raced at Park Hall, in the August Bank Holiday Monday event, winning both sidecar races outright. We can also speculate that having the experience of racing against the top British sidecar teams of the time, he simply went away and took ‘time-out’ to develop his Norton outfit and make it more competitive. Our first photos and descriptions of the resulting ‘special’ outfit date from its appearance at the Derby and District motor Club’s Donington event, Easter Monday 1937. Walter, entered as no.130, was riding in the 350cc - 1100cc sidecar & three-wheeler handicap race.
The start of this race was postponed to allow Henry Laird to make urgent repairs to the Zoller supercharger fitted to his 1084cc Morgan “Red”. The blower blades had ‘picked up’ during practice and required some extra clearance. There were only four entries for the class, the others being Walter Bibby 588cc Norton, R.Evans 595cc Grindlay-Peerless JAP, and Len Taylor who now had a 596cc Model 30 Norton. The sidecars had a 40 sec. start over the Morgan with Taylor taking the lead which he held to the end of the 10 lap race. Laird, with co-pilot and brother in law, Michael Faraday, was going very well and passed Evans and Bibby. He may well have passed Taylor, given another lap or two. So, on his first appearance with the heavily modified 588cc Model 19 Norton special, Walter achieved a creditable third place behind the 596cc Model 30 Norton of the very experienced Len Taylor and the blown Morgan of Henry Laird. It is worth noting that this result netted a prize of £10 for Taylor and £4 for Bibby, with £1 and a half pint tankard for Taylor’s passenger, Stan Nicholls. Whilst this might not seem very much reward, comparison using an inflation calculator shows these payments equivalent in today’s value as £600, £245 and £61 respectively and also gives an indication as to the healthy financial status of the Derby and District Motor Club at the time.
Walter’s next appearance at Donington was a few weeks later, at the 1937 Whit. Monday event where he rode as no. 154 in the 10 lap sidecar and three-wheeler handicap race, as shown in photo no.1. We also have the lap time sheet for this event and for the first eight laps, the Bibby Norton was consistently achieving an average lap speed around 55mph. This comfortably exceeded the race average of the winner V.S.Graham (595cc Grindley JAP) at 53mph and Cyril Hale’s Morgan at 51 mph. Following the retirement of Len Taylor’s Norton with plug trouble and Henry Laird’s Morgan with the magneto coming loose on its mountings, Walter’s Norton led the race until forced to slow down in the final two laps due to fuel starvation, finally running out of fuel completely at Starkey’s corner, just within pushing distance of the finish line to secure second place. The race was won by Versey Graham, Versey being the elder brother of Les Graham, yes THE Les Graham, winner of the inaugural 500cc World Championship in 1949 riding the AJS Porcupine. Les rode as passenger for Versey on occasion.
This was to be the swan-song for the Bibby pushrod engined special, at least as far as Donington is concerned. At the August Donington event, Walter was riding an OHC Norton 596cc Model 30, but I will come to that later.
Now is a good time to examine the details of the 588cc Norton and try to follow Walter’s thinking on what was required to build a machine which would stand the considerable rigours and stresses of racing on three wheels. For these details, I am again indebted to Roy Hoiles in allowing me to view and copy the original photos and to Archie Beggs for a first hand description of some features which he remembers from later appearances of the 588cc outfit in events at Oulton Park and Rhydymywn during the 1950’s.
As previously mentioned, the cylinder barrel is a light alloy casting encasing a cast iron liner, with a large area of cooling fins from the level of the crankcase to the base of the cylinder head and partly encircling the pushrods. Particularly important with this engine as we think that it was fuelled by petrol, not cool running dope (methanol). The cylinder head was a one-off item, cast in Aluminium-Bronze. This material, having greater thermal conductivity than cast iron, permits a higher compression ratio to be used, giving a significant power increase. Archie Beggs suggested that the head would have been cast locally at the Manganese Bronze foundry to patterns made by Walter, or at least to his design. Roy Hoiles confirmed this possibility as he remembers Walter turning bronze ‘test pieces’ for the Manganese Bronze foundry. Here we find a connection with another of the principal players in this story - Henry Laird was a grandson of the founder of Cammell - Laird, the shipbuilders. Based at Birkenhead, their ship propellers were cast at Manganese Bronze, probably alongside Walter’s unique cylinder head. There’s yet another link, Manganese Bronze eventually became the owners of the Norton name. Moving down the engine, the drive side crankcase has a large, webbed, circular plate extending from the main bearing housing to the circumference of the crankcase. Clearly visible in Photo 2, this is another bronze casting, the benefits of which would be threefold. It would give extra support to the drive-side crank which, at this time, only had a single drive side main bearing. The 588cc Model 19 has an ‘open’ frame i.e. the crankcase forms part of the lower frame and the lower front sidecar attachment is mounted here, so the additional strength deriving from the bronze plate would distribute the stresses induced by spirited cornering and acceleration. Lastly, it would help to prevent the drive side crankcase wall from breaking away. This is a known failure, apparently peculiar to sidecar racing. Gyroscopic forces generated by the flywheel/crank assembly resist lateral changes of direction during fast cornering. The reaction force, being provided by the drive side crankcase, places considerable stress on this component. Pre-unit Triumph twin engines are noted for this failure, as anyone who frequents the paddock of VMCC racing events will know. Moving on to the cycle parts, the front brake drum and brake plate appear to be made in light alloy, the drum being ribbed and of significantly larger diameter than the original and presumably constructed as a shrunk on ‘jacket’ around an iron liner. The sidecar wheel is also braked, operated via a cross shaft carried in bearings mounted on the chassis and linked by rod to the brake cam arm. The sidecar body is a very neat design, devoid of the more usual nest of tubes and grab handles and carries a road tax disc. In other photos the outfit bears the reg. no. HF4080. Walter probably enjoyed a bit of unofficial practice, as we all do. The sidecar wheel spindle is extended outboard to a small platform for the passenger to stand on when ‘hanging out’ for a left hander. All in all, the outfit shows some very clever thought and logical design, executed to a high standard.
Now we come to what might be called the second phase of Walter’s racing career. Between Whit. Monday and August 2nd 1937 he had acquired a Norton M30 596cc outfit. I believe that this was in fact the outfit raced very successfully by Bill Rose between 1932 and 1936. We have photos of Bill Rose at the Aug.1936 Donington meeting (his last recorded appearance at Donington) and Walter’s first appearance with the 596cc M30 Norton in Aug 1937. In both cases, the sidecar body has the same distinctive features and the two outfits are identical in visual appearance, with one minor difference, Walter has added his road tax disc holder.
All speculation aside, Walter’s first race with the ‘new’ outfit was not without incident. In what is considered to be one of the finest events ever held at Donington up to this date, 152 entries had been accepted, including nearly all the top U.K. riders of the time. Six sidecar outfits and 3 Morgans lined up for the start of the 5 lap 1100cc passenger class:-
- Len Taylor 596cc Norton
- Walter Bibby 596cc Norton
- Arthur Horton 596cc Norton
- E.R.Evans 499cc Rudge
- Ted Bury 746cc Douglas
- Versey Graham 595cc Grindley-JAP
- Henry Laird 1084cc Morgan
- Charlie Hale 996cc Morgan - MX4
- H.C.Bate 1084cc Morgan - JAP
Taylor took the lead in the second lap while Laird had trouble getting off the line due to a misfire but soon got into his stride. Graham and Bibby were engaged in a fierce battle for second place whilst Taylor increased his lead, but Laird was coming up through the field and driving magnificently in an effort to make up for his poor start. On the last lap Laird passed Bibby on the fast downhill approach to Starkey’s, the final corner before the chequered flag. Trying to regain his second place, Bibby cut inside the Morgan as he rounded Starkey’s, clipping the Morgan, over-turning and somersaulting off the track at an estimated 40mph, luckily without serious injury to either the outfit or the crew. Laird handled the situation well, claiming second place to Taylor who had built up an unassailable lead. They were followed home by Bury, Hale and Graham. The location of the ‘Timing Box’ gave the timekeepers a good view of Starkey’s, so they would have seen Walter’s excursion and we have a copy of his timesheet for this race. In place of a time for lap 5, the timekeepers wrote the comment “see footnote” which reads : “Scale of charges - 1 gill of Bitter beer per 10 laps, or part thereof, per race, plus ... in this instance of 1 large Brandy each for shock and extra nourishment.”
Later, following a break for lunch and the 250cc and 500cc solo races, the 10 lap ‘Passenger Grand Prix’ produced another win for Taylor who was unbeatable on the day. Laird led by the end of the first lap despite his handicap start but was destined not to finish this, his last ever, race at Donington. The Morgan’s engine began to seize due to a fractured oil pipe and he was forced to retire. Ted Bury finished in second place with Horton third. Further back, Evans and Graham did not complete the distance, nor did Bibby who was said to have ‘ridden a good race, as long as it lasted‘. Walter was probably still suffering the effects of his earlier incident. His first event on the ‘new’ machine could be described as somewhat traumatic but riding an unfamiliar machine to the limits of what is possible is, by definition, a learning process and 1938 was to prove that he had absorbed the lessons well.
Now we come to Walter’s last season of racing at Donington. By 1938 he could be considered a seasoned campaigner, able to ‘mix it’ with the best, and on an equal footing now that he was equipped with the 596 M30 Norton outfit. Over the winter, the sidecar had undergone a radical transformation. It is very possible that the original body work was too badly damaged in the Aug.’37 incident, or he decided that he wanted something lighter and minimal. There was now no bodywork beyond a simple nose-cone and mudguard over the sidecar wheel.
Easter Monday, 18th April 1938, dawned cold but bright. A large crowd was expected as this was to be the first time motorcycle races were held on the fully extended circuit incorporating a longer straight which by-passed Starkey‘s and continued down to the new ‘Melbourne’ corner. The sidecar/three-wheeler entries included -
- Jackie Beeton 490cc Norton M30
- Len Taylor 596cc Norton M30
- Walter Bibby 596cc Norton M30
- W. Tinsley 596cc Norton M30
- Versey Graham 595cc Grindley -JAP
- H.C. Bate 1084cc Morgan-JAP
- George Buck 497cc Ariel
- Charlie Hale 998cc Morgan-JAP 8/80
- Phil Heath 998cc Morgan-Blackburne
Jackie Beeton had a 20s. start from Len Taylor, but was soon caught and passed by Taylor. Beeton held on to second place until the sixth lap when he was passed first by Bibby, then Tinsley and this was the finishing order.
The second sidecar/three-wheeler race was more exciting as it featured three separate battles. As before, Beeton took an early lead but the fight for first place quickly developed into a contest between Taylor and Arthur Horton. Horton’s outfit appeared to have the edge on speed down the straights, possibly due to carrying more corner speed as it was now set up to use the ‘front exit’ passenger technique on left hand corners. Horton finished not only in first place but also broke the sidecar lap record at 61.34 mph. The second duel, between Beeton and Bibby for third place went to Bibby, with Beeton finishing fourth. Meanwhile, George Buck was successfully challenging Graham for fifth place. Taylor and Beeton both broke the 60mph barrier and must have finished very closely, but third place man Bibby was only 30s. behind the winner with an average speed of 58.87mph.
The next Donington event was on Whit. Mon. 6th June 1938. The day began with a thin drizzle and high winds, not ideal racing conditions, but still attracted a good sized crowd and produced a new sidecar lap record. The first of the two sidecar / three-wheeler races featured seven outfits and three Morgans. Len Taylor took an early lead and was only challenged, unsuccessfully, by Horton who in turn was challenged strongly by Bibby, until a sidecar wheel puncture put Bibby out of contention on the sixth lap. This was disappointing as Walter’s battle with Horton had reduced his lap times to within 4s. of the lap record, set by Horton at the previous event. The race was won by Len Taylor at race record speed with Horton in second place. Phil Heath (Morgan - Blackburne) held on to a lucky third place, his top gear drive chain breaking as he crossed the finish line with Graham in fourth position. In the second race, Taylor again stormed off into a decisive lead with Horton in hot pursuit and that’s how the race finished, with Bibby in third place and F.E.G. Radcliffe (490cc Norton M30) in fourth place. Taylor again broke the sidecar race and lap records at 61.67mph. By contrast, in this race, the Morgan men were struggling. Hale came off the circuit at Redgate corner ( a left hander in this era) regained control but then retired with a seized engine and Phil Heath retired with mechanical problems in the second lap. Len Taylor and passenger Stan Nicholls must have been very satisfied with their performance and with their 596cc Norton, on that day they were seemingly unbeatable.
Now we come to Walter Bibby’s finest performance at Donington. The August Bank Holiday event was held on 1st Aug. 1938 and was split into two distinct sessions. In the morning, all classes, including the sidecars and three-wheelers were to race over the relatively short distance of four laps, approx 12 ½ miles. Then after a break for lunch, the “Grand Prix” races would be contested over 16 laps (50 miles) for the solo classes and 8 laps for the sidecar/three-wheeler class.
The first sidecar race seems to have been relatively uneventful. J.Varlow, riding Ratcliffe’s 490cc Norton outfit, was given a 40s. start, ahead of the 596cc Nortons and the sole Morgan entry, Charlie Hale. The 4 laps proved insufficient for Taylor and Hale to catch Varlow despite trying all they knew. Horton’s challenge was defeated by an oiled plug on the first lap and Hale, whose engine was by then firing on only one cylinder, had to give way to Evans (490cc Rudge) on the last lap. In the attempt to catch Varlow and stay with Taylor, Hale had raised the lap record for the class to 62.09mph. Walter Bibby is not mentioned in the results for this race.
After lunch, the 8 lap sidecar and three-wheeler Grand Prix race began to shape up well with a major battle for supremacy between Bibby and Taylor, with neither prepared to give any ground. The outcome was an uncharacteristic loss of control by Taylor who left the circuit at Redgate, losing his passenger and eventually coming to rest “very shaken” and out of the race. Meanwhile, Bibby was now engaged in battle with Horton but Horton also left the race, albeit less dramatically. His carburettor float chamber had succumbed to the vibration and fractured, putting him out of the race and giving Bibby first place which he held the end. He was followed home 53s. later by Varlow and then E.R.Evans (499cc Rudge) in third place. It could be argued that Walter Bibby and passenger won this race by default, however there is an undeniable fact to refute this. In the course of the race they had raised both the race and lap records. This made them the fastest men on three wheels around Donington at the time and must have given Walter and his unnamed passenger, about whom we know absolutely nothing, tremendous satisfaction. They had come a long way in the sport, in a relatively short time.
That would normally be the end of the season for motorcycle racing at Donington but 1938 marked the 50th Anniversary of the invention of the pneumatic tyre by John Boyd Dunlop. On 11th. August, ‘The Motorcycle’ was reporting a large entry for the Dunlop Jubilee event to be held at Donington on 27th Aug. On the day, a crowd of 20,000 spectators was recorded. The LMS Railway Co. was running a special train, leaving London Paddington station at 0825 and arriving at Derby at 1125. This allowed for travel by bus to the circuit in time for the racing which was due to commence at 1415. An illustration of just how important Donington Park had become under the management of Fred Craner and the Derby and District Motor Club.
The 5 lap sidecar and three-wheeler race was programmed to start at 1530hrs. Alfred Kirsch (100cc Universal -JAP) set off very quickly, demonstrating why he was the 1936 Swiss National sidecar champion (1000cc class). Kirsch was closely followed by Bibby and Horton, Horton having recently won the sidecar race at the 1938 Swiss Grand Prix. Behind these three contenders, Hale was driving his 8/80 JAP -Morgan with considerable élan but Taylor was, unusually, suffering from engine trouble and not showing his usual form. Horton managed to pass Bibby and set off after Kirsch, catching him on the fourth lap when the Universal-JAP retired with engine problems. ‘The Motorcycle’ reported that the action was heart stopping with front forks whipping about as though they were made of elastic and Charlie Hale coming round a right hand bend, in the middle of the sidecar pack, in a spectacular fashion. This superb race ended in a win for Arthur Horton, with Bibby only 5s behind followed by Hale. Horton’s outfit was by this stage, technically years ahead of the opposition here in the U.K.
It featured suspension on all three wheels, a padded platform and passenger front exit provision, along with much cleaner aerodynamics provided by the alloy sidecar wheel cover and nose cone. So advanced that it did not look out of place in the early 1950’s when sidecar racing took its next steps forward following the establishment of the World Championships in 1949. It is worth noting that the benefits of these advances were still the subject of debate into the 1950’s by leading exponents such as Eric Oliver, Cyril Smith, Pip Harris and Ted Davies.
The racing career of Walter Bibby, at least so far as Donington Park is concerned, came to a close with that late August 1938 event. We have been unable to find mention of him in any of the 1939 programmes or reports.
So what became of the unique 588cc Norton M19 special? Archie Beggs recalls seeing it in competition throughout the 1950’s and into the early 1960’s, suggesting that it did not leave the Merseyside area. Sadly, he also remembers that it was finally scrapped. The early ’60’s was a time when interest in preserving our racing heritage was at a particularly low point. If only someone had the foresight to rescue and preserve this machine, what a wonderful sight and sound it would have made in Vintage Racing today.
As for Walter, his nephew Roy tells me that apart from his engineering business, he had two big interests in life - Motorcycles and fishing. Paddock photos suggest that he greatly enjoyed his racing and the results show that he was competitive at the top level of the sport. Personally I like to think of him as a pioneer, pushing the limits of his riding skill and his machines in a relatively new, exciting and rapidly developing branch of motorcycle sport. With the 588cc Special he had so much in common with those who were to follow much later, in Vintage racing, seeking to develop apparently unlikely machines into race-worthy devices - but not always with Walter Bibby’s degree of success.
The photo acknowledgements are as follows - Photo 1 and 6: Bob Light and Mike Lawrence. All others Roy Hoiles.
↧
c1927 Model 16H Norton
↧
1930 Model JE Norton ... a rarity!
-SG- We have had some postings about Norton's first OHV 350 before but they did not sell that well and relatively few of them have survived. So ... when I heard a couple of months back that one was for sale in Scotland I contacted the seller to ask for more details, which were not provided. So I was pleasantly surprised to find the bike is now for sale at Andy Tiernan's place and anyone interested can contact Andy direct. Meanwhile here are some photos of it - matching frame and engine numbers - and originally shipped April 1929. Apart from a replacement rear mudguard and later carb./magneto, it looks pretty original.
↧